Star Micronics SB-15 Printer User Manual


 
CHAPTER 3
GETTING STARTED
WITH SD-lo/l5
You have assembled and tested your printer, and seen a quick
sample of SD-10/15’s capabilities in the self-test. Now it’s time
to do what you bought SD-lo/l5 to do: print information from
your computer.
But first you need to connect SD-lo/l5 to your computer.
Figure 3-l shows where the cables connect, but there’s more that
you need to know complete instructions for connecting SD- lo/ 15
to many popular computers are given in the appendix. Find the
appendix that covers your computer and follow the instructions
for connecting SD- 10/l 5. If your computer isn’t listed in the
appendix, then ask your Star dealer which computer that is listed
is most like yours. If none of the listed computers are similar to
yours, then your Star dealer will give you advice on connecting
SD- 1 O/ 15 to your computer.
When everything is connected, come back here and we will check
it out!
Interface connector
lip
Figure 3-l. SD-lo/l5 has parallel interface as standard.