Filter
Top Products
When you run this program you should get this:
30 LPRINT "This line is CONDENSED pitch."
4@ LPRINT CHR$(27) "B" CHR$(2) ; 'Select elite pitch.
541 LPRINT "This line is ELITE pitch."
60 LPRINT CHR$(27) "p" CHR$(l) ; 'Select proportional.
741 LPRINT "This line is PROPORTIONAL spacing."
88 LPRINT CHR$(27) "p" CHR$(@) ; 'Cancel proportional.
98 LPRINT CHR$(27) "By CHR$(l) ; 'Select pica pitch.
188 LPRINT "This line is PICA pitch (normal)."
This line is CONDENSED pitch.
This line is ELITE pitch.
This line is PROPORTIONhL spacing.
This line is F'ICA pitch Incwmal).
-
-
Line 20 turns on condensed pitch with < ESC > “B” CHR$(3).
Line 30 prints a line at 17 characters per inch. The < ESC > “B”
CHR$(2) in line 40 changes SD-lo/l5 to elite pitch and line 50
prints a line in elite pitch. Line 60 turns on proportional spacing
with < ESC > “p” CHR$(l), and line 70 prints a line with
proportional spacing. Line 80 and line 90 reset SD-lo/l 5 to pica
pitch and line 100 prints a line in pica pitch.
Pica pitch and condensed pitch can be set with “shortcut” codes.
Instead of using < ESC > “B” CHR$(n), you can set them with
a single code. CHR$( 18) sets pica pitch and CHR$( 15) sets
condensed pitch. You can not set elite pitch with a single code.
--
N Expanded print
- Each of SD-10/15’s four print pitches can be enlarged to twice v’
its normal width. This is called expanded print.Try this program
-
to see how it works:
10 'Demo expanded mode.
-
2@ LPRINT "Demonstration of " ;
30 LPRINT CHR$(14) ; 'Expanded mode on.
-
40 LPRINT "EXPANDED" ;
50 LPRINT CHR$(2Q)) ; 'Expanded mode off.
60 LPRINT " printing."
-
70 LPRINT "Notice that " ;
84) LPRINT CHR$(14) ; 'Expanded mode on.
-
98 LPRINT "EXPANDED mode"
100 LPRINT "automatically turns off at end of a line."
-
42
-