Filter
Top Products
Appendix H Service Processor Commands 163
Return Codes
TABLE H-3 lists the return codes for this subcommand.
SP Set Date Subcommand
Description: Sets the date and time on the SP RTC.
Format
Command format:
sp set date DATE_STRING
TABLE H-4 lists the argument for this subcommand.
You can use this command to initially set the platform RTC after the platform has
lost CMOS backup power. If the platform is in the state in which the operating
system (OS) is communicating with the SP, the platform time will override the SP
time, which allows the platform and sp event times to be in sync in the event log.
TABLE H-3 Return Codes for Subcommand sp get date
Return Code ID Description
NWSE_Success 0 Command successfully completed.
NWSE_InvalidUsage 1 Invalid usage: bad parameter usage, conflicting options
specified.
NWSE_NoPermission 6 Not authorized to perform this operation.
NWSE_NoMemory 8 Insufficient memory.
TABLE H-4 Argument for Subcommand sp set date
Arguments Description
DATE STRING Specifies the date and time on the Service Processor RTC. The date
string is a UTC date of the form YYYY-MM-DD HH:MM:SS.