Filter
Top Products
Chapter 2 IPMI Server Management 35
arp respond
[on|off]
Sets the BMC-generated ARP responses.
arp generate
[on|off]
Sets the BMC-generated gratuitous ARPs.
arp interval
[seconds] s
Sets the interval for the BMC-generated gratuitous ARPs.
auth level,...
type,...
This command sets the valid authtypes for a given auth
level.
Levels can be: callback, user, operator, admin
Types can be: none, md2, md5
fru print Reads all inventory data for the Customer Replaceable
Units (CRUs) and extracts such information as serial
number, part number, asset tags and short strings
describing the chassis, board or product.
sdr list Reads the Sensor Data Record (SDR) and extracts sensor
information, then queries each sensor and prints its name,
reading and status.
sel info Queries the BMC for information about the system event
log (SEL) and its contents.
clear Clears the contents of the SEL.
The clear command cannot be undone.
list Lists the contents of the SEL.
TABLE 2-2 Expressions and Parameters for IPMItool (4 of 4)
Expression Parameter Sub-parameter Description and examples