Filter
Top Products
222 Sun Fire V20z and Sun Fire V40z Servers, Server Management Guide • May, 2004
SP Update Subcommands
The subcommands in TABLE H-91 manage the SP flash.
SP Update Flash All Subcommand
Note – Before using this command you must start the Java Update Server. For
instructions on starting Java Update Server, see “Updating the Service Processor
Base Component” on page 23.
Description: Updates the entire SP flash image (kernel, base file system and value
add) as part of a major SP software update. This command requires the use of the
Java Update Server and verifies that it is available before beginning the update
process. Once verified, the SP is rebooted and the update process is initiated. When
completed, the SP is automatically rebooted using the updated image.
Format
Command format:
sp update flash all {-i | --ipaddress}
<IP ADDRESS xxx.xxx.xxx.xxx> [{-p | --port}] <PORT#>
TABLE H-91 SP Flash Subcommands
Subcommand Description
sp update flash all Sets the update flag to start the full flash update on the
next reset of the SP.
sp update flash applications Copies the file Value-Add to the Value-Add
component of the SP flash.
sp update flash pic Updates the PIC firmware to a newer version.
sp update diags Updates the diagnostics to a newer version.