Filter
Top Products
50 Sun Fire V20z and Sun Fire V40z Servers, Server Management Guide • May, 2004
Server MIB Details
SNMP uses object identifiers (OIDs) to provide name variables by which objects are
grouped together for easier reference. These servers provide agents for the MIBs
shown in
TABLE 3-3:
TABLE 3-3 SNMP MIBs
MIB OID Description
SP-MasterAgent-MIB
.mib
.1.3.6.1.4.1.9237 Creates the main trunk of the server MIB
tree. All other MIBs of the SP branch
from this tree. To be loaded first while
integrating with any third-party
framework.
SP-INVENTORY-MIB
.mib
.1.3.6.1.4.1.9237.2.1.
1.1
.1.3.6.1.4.1.9237.2.1.
1.1.2
.1.3.6.1.4.1.9237.2.1.
1.1.3
Used for querying inventory information
for all Sun Fire V20z and Sun Fire V40z
servers hardware and software
components.
Hardware Inventory Table: Collects all
hardware component inventory.
Software Inventory Table: Collects all
software component inventory.
SP-SST-MIB.mib .1.3.6.1.4.1.9237.2.1.
1.4
Defines objects for the System State Table
in the SP. Contains all sensor readings,
including the name of the sensor, its
current value, maximum allowed value,
measurement type, scale and scanning
interval.
SP-PLATFORM-MIB.mib .1.3.6.1.4.1.9237.2.1.
1.5
Defines objects for the platform SNMP
which includes osstate, platform state,
and platform IP table.
SP-EVENT-MIB.mib .1.3.6.1.4.1.9237.2.1.
1.6
Identifies the OIDs associated with all
SNMP traps originated from the SP.
SP-GROUP-MIB.mib .1.3.6.1.4.1.9237.2.1.
1.7
Defines objects for the SP, including host
name, DNS, a reboot node, a node to
hold the last port 80 postcode, a clone
tree and an IP table.