Filter
Top Products
Chapter 4: Phoenix BIOS
4-17
Console Redirection
Access the submenu to make changes to the following settings.
COM Port Address
This feature allows the user to specify whether to redirect the console
to On-board COM A or On-board COM B. This setting can also be
Disabled.
BAUD Rate
This feature allows the user to select the BAUD rate for console
redirection. The options are 300, 1200, 2400, 9600, 19.2K, 38.4K, 57.6K
and 115.2K.
Console Type
This feature allows the user to choose from the available options to
select the console type for console redirection. The options are VT100,
VT100,8bit, PC-ANSI, 7bit, PC ANSI, VT100+, VT-UTF8.
Flow Control
This feature allows the user to choose from the available options to
select the flow control for console redirection. The options are: None,
XON/XOFF, and CTS/RTS.
Console Connection
This feature allows the user to select the method of console connection:
either Direct or Via Modem.
Continue CR after POST
This feature allows the user to decide whether to continue with
console redirection after the POST routine. The options are On and
Off.