Telect, Inc. • USA +1.509.926.6000 • Mexico +1.52.33.3836.3700
Poland +1.48.713.239.100 • UK +1.44.1489.889500 • www.telect.com
Copyright © 2002 Telect, Inc., All Rights Reserved • Telect Publication 1
22645-5 A0
4. Service
ALERT
!
ALERT! This product must be installed and maintained only by qualified personnel. Verify all connections
meet requirements specified in local electric codes or operating company guidelines before supplying power.
Protect this equipment with a fuse or breaker sufficient to interrupt power levels specified in Section 1 of this
manual.
OWNER MAINTENANCE
Telect’s Dual 600A BDFB / BDCBB (007-0001-2600) does not need preventive maintenance.
IN CASE OF DIFFICULTY
If problems occur after initial installation, check all cable connections and the installation instructions in Section 2.
For technical support, contact Telect —
By e-mail: getinfo@telect.com
By phone: 888-821-4856 or 509-921-6161
IN-WARRANTY SERVICE
Contact your Telect equipment distributor, or call a Telect Customer Service Representative:
1-800-551-4567
1-509-926-6000
Telect will repair or replace defective products within the limits of the warranty. See “Repacking for Shipment” in this section.
NOTE
Call a Customer Service Representative for a Return Material Authorization (RMA) before returning any equipment.
OUT-OF-WARRANTY SERVICE
The procedure for out-of-warranty service is the same as for in-warranty service, except that Telect charges a processing fee, and
you must submit a Purchase Order along with a Return Material Authorization (RMA) before returning equipment. Call a Customer
Service Representative for help getting these forms.
The processing fee guarantees a repair estimate and is credited against actual material and labor costs.