Filter
Top Products
Communication Link 103
Note: Each SELECT screen, except All+…, is initially displayed with
nothing pre-selected. All+… is displayed with everything pre-selected.
To select items to send:
1. Press y 8 on the sending unit to display the
LINK SEND menu.
2. Select the menu item that describes the data type to send. The
corresponding SELECT screen is displayed.
3. Press } and † to move the selection cursor ( 4 ) to an item you want
to select or deselect.
4. Press Í to select or deselect the item. Selected names are marked
with a 0.
Note: An asterisk (ä) to the left of an item indicates the item is
archived.
5. Repeat steps 3 and 4 to select or deselect additional items.
Sending the Selected Items
After you have selected items to send on the sending unit and set the
receiving unit to receive, follow these steps to transmit the items. To set
the receiving unit, see Receiving Items.
1. Press ~ on the sending unit to display the
TRANSMIT menu.
2. Confirm that
Waiting... is displayed on the receiving unit, which
indicates it is set to receive.