Texas Instruments TI-84 Plus Calculator User Manual


 
104 Communication Link
3. Press Í to select 1:Transmit. The name and type of each item are
displayed line-by-line on the sending unit as the item is queued for
transmission, and then on the receiving unit as each item is accepted.
Note: Items sent from the RAM of the sending unit are transmitted
to the RAM of the receiving unit. Items sent from user data archive
(flash) of the sending unit are transmitted to user data archive (flash)
of the receiving unit.
After all selected items have been transmitted, the message
Done is
displayed on both calculators. Press } and to scroll through the
names.
Sending to a TI-84 Plus Silver Edition or TI-84 Plus
You can transfer variables (all types), programs, and Flash applications to
another TI-84 Plus Silver Edition or TI-84 Plus. You can also backup the
RAM memory of one unit to another.
Note: Keep in mind that the TI-84 Plus has less Flash memory than the
TI-84 Plus Silver Edition.
Variables stored in RAM on the sending TI-84 Plus Silver Edition will
be sent to the RAM of the receiving TI-84 Plus Silver Edition or TI-84
Plus.
Variables and applications stored in the user data archive of the
sending TI-84 Plus Silver Edition will be sent to the user data archive
of the receiving TI-84 Plus Silver Edition or TI-84 Plus.
After sending or receiving data, you can repeat the same transmission to
additional TI-84 Plus Silver Edition or TI-84 Plus units—from either the
sending unit or the receiving unit—without having to reselect data to
send. The current items remain selected. However, you cannot repeat
transmission if you selected
All+ or All..
To send data to an additional TI-84 Plus Silver Edition or a TI-84 Plus:
1. Use a USB unit-to-unit cable to link two units together.
2. On the sending unit press y 8 and select a data type and items
to SEND.
3. Press ~ on the sending unit to display the
TRANSMIT menu.