Filter
Top Products
© June 2005 TOSHIBA TECe-STUDIO281c/351c/451c ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 127
2
615GeneralSize information of main
memory and page memory
ALL-SYSDisplays the sizes of
the main memory and
page memory. Enables
to check if each mem-
ory is properly recog-
nized.
2
616CounterCounting method in Twin
Color Mode
(Limitation Function)
ALLJPN: 1
UC: 0
EUR: 0
<0-1>
SYSSets the counting
method in Twin Color
Mode with the Limita-
tion Function.
0: Count as color
1: Count as black
1
617User
interface
Print setting without
department code
ALL1
<0-2>
SYS0: Printed forcibly
1:Not printed
2:Deleted forcibly
1
618User
interface
Default setting of RADF
original size
PPC0
<0-1>
SYS0: Same size originals
1: Mixed size originals
1
619Paper
feeding
Time lag before auto-start
of bypass feeding
ALL4
<0-10>
SYSSets the time taken to
add paper feeding
when paper in the
bypass tray has run out
during the bypass feed
copying.
0:Paper is not drawn
in unless the
[START] button is
pressed.
1-10: Setting value x
0.5sec.
1
620User
interface
Department management
setting (Copier)
PPC1
<0-1>
SYS0: Invalid
1: Valid
1
621User
interface
Department management
setting (FAX)
FAX1
<0-1>
SYS0: Invalid
1: Valid
1
622User
interface
Department management
setting (Printer)
PRT1
<0-1>
SYS0: Invalid
1: Valid
1
623User
interface
Department management
setting (Scanner)
SCN1
<0-1>
SYS0: Invalid
1: Valid
1
624User
interface
Department management
setting (List print)
PRT1
<0-1>
SYS0: Invalid
1: Valid
1
625User
interface
Blank copying prevention
mode during RADF jam-
ming
PPC0
<0-1>
SYS0:OFF
1: ON (Start printing
when the scanning
of each page is fin-
ished)
1
627User
interface
Rotation printing at the
nonsorting
ALL0
<0-1>
SYS0: Not rotating
1: Rotating
1
628User
interface
Direction priority of original
image
PPC0
<0-1>
SYS0:Automatic
1:Portrait
1
629User
interface
Department management
setting
ALL0
<0-1>
SYS0: Invalid
1: Valid
1
632User
interface
Automatic calibration dis-
closure level
PPC1
<0-2>
SYSSets the disclosing level
of automatic calibration.
0:Service technician
1:Administrator
2:User
1
Setting mode (08)
Code
Classifi-
cation
Items
Func-
tion
Default
<Accept-
able
value>
RAMContents
Pro-
cedur
e