Filter
Top Products
© June 2005 TOSHIBA TECe-STUDIO281c/351c/451c ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 131
2
672GeneralInitialization of department
management information
--SYSInitializing of the depart-
ment management
information
*Enter the code with
the digital keys and
press the [INITIAL-
IZE] button to per-
form the
initialization.
If the area storing
the department
management infor-
mation is destroyed
for some reason,
Enter Department
Code! is displayed
on the control panel
even if the depart-
ment management
function is not set
on. In this case, ini-
tialize the area with
this code. This area
is normally initial-
ized at the factory.
3
675-0Paper
feeding
Coated Paper
Mode setting
for paper
source
Upper
drawer
ALL0
<0-1>
SYSSets whether or not
applying the Coated
Paper Mode to each
paper source.
0: Normal mode
1: Coated Paper Mode
*Coated Paper Mode
- This mode is
selected when the
paper which often
causes the misfeed-
ing (ex. coated
paper) is used. The
occurrence of mis-
feeding is reduced
by lengthening the
jam detection time.
However, the print-
ing speed is low-
ered since the
printing cycle is also
lengthened with the
lengthened jam
detection time.
4
675-1Lower
drawer
ALL0
<0-1>
SYS4
675-2PFP upper
drawer
ALL0
<0-1>
SYS4
675-3PFP lower
drawer
ALL0
<0-1>
SYS4
675-4LCFALL0
<0-1>
SYS4
Setting mode (08)
Code
Classifi-
cation
Items
Func-
tion
Default
<Accept-
able
value>
RAMContents
Pro-
cedur
e