Toshiba 281C All in One Printer User Manual


  Open as PDF
of 200
 
e-STUDIO281c/351c/451c ERROR CODE AND SELF-DIAGNOSTIC MODE© June 2005 TOSHIBA TEC
2 - 140
820-0Develop-
ment
Color auto-
toner sensor
output
display for
developer
material
YALL
(color)
-
<0-1023>
MDisplays the output
value of the color auto-
toner sensor to the
sleeve in color printing.
4
820-1MALL
(color)
-
<0-1023>
M4
820-2CALL
(color)
-
<0-1023>
M4
821Develop-
ment
ON/OFF of the mode for
developer material stabili-
zation
ALL
(color)
0
<0-1>
MSets whether or not
performing an aging to
stabilize the status of
developer material
when the toner density
is uneven or the toner
charging amount is low-
ered.
0: ON
1: OFF
1
822-0Develop-
ment
Number of
times the
mode for
developer
material stabi-
lization is per-
formed
YALL
(color)
0
<0-255>
MDisplays the number of
times the developer
material stabilization is
performed.
4
822-1MALL
(color)
0
<0-255>
M4
822-2CALL
(color)
0
<0-255>
M4
823-0Develop-
ment
Color auto-
toner sensor/
light amount
correction
voltage abnor-
mal detection
YALL
(color)
0
<0-1>
MDisplays 1! when the
abnormal output volt-
age is detected for the
color auto-toner sensor
light amount correction.
([CF40] error)
0: Normal
1: Abnormality
detected
4
823-1MALL
(color)
0
<0-1>
M4
823-2CALL
(color)
0
<0-1>
M4
824-0Develop-
ment
Color auto-
toner sensor/
toner density
detection volt-
age abnormal
detection
YALL
(color)
0
<0-1>
MDisplays 1! when the
abnormal toner density
detection voltage is
detected. ([CF20] error)
0: Normal
1: Abnormality
detected
4
824-1MALL
(color)
0
<0-1>
M4
824-2CALL
(color)
0
<0-1>
M4
849FuserFusing control switching for
TWD and SAD models
ALLOther
than
TWD and
SAD: 0
TWD and
SAD: 1
<0-1>
M1
858-0Develop-
ment
Color toner
forced supply
level display
YALL
(color)
0
<0-1>
MBecomes 1! when the
toner density decreases
and it is judged forced
toner supply is needed.
0: Normal level
1: Forced supply level
14
858-1MALL
(color)
0
<0-1>
M14
858-2CALL
(color)
0
<0-1>
M14
Setting mode (08)
Code
Classifi-
cation
Items
Func-
tion
Default
<Accept-
able
value>
RAMContents
Pro-
cedur
e
 previous next