Filter
Top Products
© June 2005 TOSHIBA TECe-STUDIO281c/351c/451c ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 5
2
EA10Finisher jam
(Finisher section)
Paper transport delay jam: The paper which has
passed the bridge
unit does not reach the inlet sensor. [MJ-1022/
1023/1024/1101]
P. 5-30
EA20 Paper transport stop jam:
(1) The paper does not pass through the inlet sen-
sor.
[MJ-1022/1023/1024]
(2) The paper has passed through the inlet sensor
but does not reach or pass the feed path sensor
or processing tray sensor.
[MJ-1023/1024]
(3)The paper which has passed through the inlet
sensor does not reach the transport sensor.
[MJ-1101]
P. 5-32
EA21Paper size error jam: Paper does not reach the sen-
sor because the paper is shorter than spec. [MJ-
1101]
P. 5-33
EA30Power-ON jam:
(1) Paper exists at the inlet sensor when power is
turned ON.
[MJ-1022/1023/1024]
(2) Paper exists at the feed path sensor or pro-
cessing tray sensor when power is turned ON.
[MJ-1023/1024]
P. 5-34
EA31Transport path paper remaining jam: The paper
which has passed through the inlet sensor does not
reach the transport sensor. [MJ-1101]
P. 5-35
EA32Exit paper remaining jam: The paper is remaining
on the finishing tray when the power is turned ON.
[MJ-1101]
P. 5-35
EA40Finisher jam
(Finisher section)
Door open jam:
1)The finisher has been released from the equip-
ment during printing. [MJ-1022]
2)The upper/front cover of the finisher section or
the upper/ front door of the puncher section has
opened during printing. [MJ-1023/1024]
3)The front cover or stationary tray cover is
opened during paper transport. [MJ-1101]
P. 5-36
EA50Stapling jam: Stapling is not performed properly.
[MJ-1022/1023/1024/1101]
P. 5-38
EA60Early arrival jam: The inlet sensor detects the paper
earlier than a specified timing. [MJ-1022/1023/
1024/1101]
P. 5-40
EA70Stack delivery jam: It cannot deliver the stack of
paper on the intermediary process tray to the stack
tray. [MJ-1022]
P. 5-41
Stack exit belt home position error: The stack exit
belt is not at the home position. [MJ-1101]
Error codeClassificationContentsTroubleshooting
06/08