Filter
Top Products
208
9.JOB STATUS
12.ERROR CODE (Cont.)
9
2C67, 2C68
2C6A
Failed to send E-Mail message Retry the scan. NIC time out error occurs
during the transmission.
2C6B Invalid address specified in From: field Make sure you specify correct E-mail address
for this equipment and retry the scan.
2C6C Invalid address specified in To: field Make sure you are sending to correct E-mail
addresses and retry the scan.
2C6D NIC system error Contact your dealer for support.
2C70 SMTP service is not available Ask your administrator whether the SMTP
service is enabled.
2C80 Failed to process received E-mail job Make sure the network cable is connected
properly.
2C81 Failed to process received Fax job Make sure the telephone line is connected
properly.
2CC0 Job canceled Job was canceled.
2CC1 Power failure occurred Power failure occurred during the
transmission.
Save as file
2D10, 2D12,
2D13,
2D20-2D22
Illegal Job status A system error has occurred during storing a
file. Retry it.
2D11 Not enough memory Make sure there are enough memory to save
the scan job.
2D14, 2D61 Invalid parameter specified Make sure you specify the settings correctly
and try again.
2D15, 2D65 There are too many documents in the
folder. Failed in creating new document.
Delete the data in the local shared folder in the
equipment and retry the scan.
2D30 Failed to create directory Retry the scan. The system could not save the
scan job.
2D31, 2D33 Failed to create file Retry the scan. The system could not save the
scan job.
2D32 Failed to delete file Retry the scan. The system could not save the
scan job.
2D40 Failed to convert image file format Retry the scan. The system could not save the
scan job.
2D60 Failed to copy file Retry the scan. The system could not save the
scan job.
2D62 Failed to connect to network destination.
Check destination path.
Make sure the network folder is shared in your
network and retry the scan.
Error Code Message Corrective Action