Filter
Top Products
4 Replacement Procedures
Satellite A500D Maintenance Manual 4-vi
Figure 4.32 Removing the VGA Board........................................................................... 4-40
Figure 4.33 Reapply the Shinetsu 7726 grease on the thermal module
and remove any release papers .................................................................... 4-41
Figure 4.34 Removing the Thermal Module spring screws ............................................4-42
Figure 4.35 Removing the CPU ...................................................................................... 4-43
Figure 4.36 Reapply the Shinetsu 7726 grease on the thermal module
and remove any release papers .................................................................... 4-44
Figure 4.37 Removing the display assembly................................................................... 4-45
Figure 4.38 Removing the LCD Bezel Assembly from the low-end model ................... 4-46
Figure 4.39 Peel off the bezel.......................................................................................... 4-47
Figure 4.40 Pull out the hinge wall ................................................................................. 4-47
Figure 4.41 Remove the bezel......................................................................................... 4-48
Figure 4.42 Removing the LCD Bezel Assembly from the high-end model.................. 4-48
Figure 4.43 Wrap the flat blade screwdriver with tape................................................... 4-49
Figure 4.44 Press the hinge wall ..................................................................................... 4-49
Figure 4.45 Pry up the bezel hinge wall.......................................................................... 4-50
Figure 4.46 Release the rest of the hooks........................................................................ 4-50
Figure 4.47 Push the right side of the bezel upward .......................................................4-51
Figure 4.48 Push the left side of the bezel upward ......................................................... 4-52
Figure 4.49 Release hooks from the bottom of the bezel................................................4-53
Figure 4.50 Release hooks from the right and left side of the bezel............................... 4-53
Figure 4.51 Release the hooks from the upper side of the bezel..................................... 4-54
Figure 4.52 Press the bezel hinge wall............................................................................4-55
Figure 4.53 Press the bottom hooks on the display assembly......................................... 4-55
Figure 4.54 Press the left and right side of the bezel for the low-end model/Press the
hooks on the left and right side of the bezel for the high-end model ......... 4-56
Figure 4.55 Press the bezel upside hooks........................................................................ 4-56
Figure 4.56 Removing the Inverter Board ...................................................................... 4-57
Figure 4.57 Removing the LCD Module from the LCD cover assembly
(high-end model).......................................................................................... 4-58
Figure 4.58 Removing the LCD Module from the LCD cover assembly
(low-end model)........................................................................................... 4-59
Figure 4.59 Removing the LCD Hinge Assembly .......................................................... 4-60