Filter
Top Products
4 Replacement Procedures Error! Style not defined. Error! Style not defined.
4.12 Bluetooth Card
Removing the Bluetooth card
Remove the Bluetooth card according to the following procedures and Figure 4.21.
1. Remove the Bluetooth cable from the Bluetooth card.
2. Press down the latch and push the Bluetooth card in the direction indicated in the figure
4.21 and slide the Bluetooth card out.
3. Remove the card from the logic upper assembly.
Figure 4.21 Removing the Bluetooth card
Note: Be careful not to damage the Bluetooth Card when connecting it with the cable. Make
sure the card is seated in the correct position.
Installing the Bluetooth card
Install the Bluetooth card according to the following procedures.
1. Seat the card in the correct position on the logic upper assembly.
2. Slide the card to the end of the track.
3. Reroute the Bluetooth cable in the cable fixing ribs.
Satellite A500D Maintenance Manual 4-30