Filter
Top Products
4 Replacement Procedures Error! Style not defined. Error! Style not defined.
5. Pull the Fingerprint board up to remove it from the logic upper assembly.
M2.5x3*1
M2.5x4*1
Figure 4.23 Removing the Touchpad boards and Fingerprint board
Installing the Touchpad Bracket, Touchpad Boards and Fingerprint Board/Touchpad
Switch Board
Install the Touchpad bracket, the Touchpad boards (the button and switch board) and Fingerprint
board according to the following procedures.
1. Seat the Touchpad switch board, the Touchpad button board and Fingerprint board in the
correct position.
2. Secure the boards with one M2.5x3 screw and one M2.5x4 screw.
3. Seat the touchpad bracket over the Touchpad boards and Fingerprint board, then secure
the bracket with four M2.5x4 screws.
4. Connect the eight cables to the Motherboard.
Satellite A500D Maintenance Manual 4-32