Filter
Top Products
Error! Style not defined. Error! Style not defined. 4 Replacement Procedures
Installing the VGA Board and VGA Thermal Module
Install the VGA board and thermal Module according to the following procedures.
1. Reapply Shinetsu 7762 grease on the VGA thermal module as shown in Figure 4.33. If
you use one new VGA thermal module, remove the release papers on the thermal pads
first.
Thermal Grease
Thermal Pad
Figure 4.33 Reapply the Shinetsu 7726 grease on the thermal module
and remove any release papers
2. Seat the VGA board in the correct position on the motherboard and secure it with four
MM2.0D screws according to the number sequence sealed on the thermal module.
Satellite A500D Maintenance Manual 4-41