Error! Style not defined. Error! Style not defined. 4 Replacement Procedures
4.11 Speakers
Removing the Speakers
Remove the Speakers according to the following procedures and Figure 4.20.
1. Hold the speaker in place and then remove four special M2.5x6 screws from the left and
right speaker.
2. Remove the left and right speakers from the logic upper assembly.
M2.5x6*4
Figure 4.20 Removing the speakers
Installing the Speakers
Install the speakers according to the following procedures.
1. Seat the left and right speaker in the correct position.
2. Press the speakers in place and secure them with four special M2.5x6 screws.
Satellite A500D Maintenance Manual 4-29