Filter
Top Products
Error! Style not defined. Error! Style not defined. 4 Replacement Procedures
6. Remove the tape and LVDS cable connector. Then detach the LVDS cable.
Figure 4.60 Removing the LVDS cable from the LCD module
NOTE:
Integrated Circuits (ICs) are fragile. Use extreme care not to apply pressure to the ICs along
the edges of the LCD module.
Dispose of used LCD panels (fluorescent (FL) tubes) as required by local ordinances or
regulations.
Tape around the LVDS cable must be carefully peeled away before disconnecting the cable
from the LCD panel.
Satellite A500D Maintenance Manual 4-61