Filter
Top Products
Error! Style not defined. Error! Style not defined. 4 Replacement Procedures
4.13 Touchpad Bracket, Touchpad Boards and Fingerprint Board
Removing the Touchpad Bracket, Touchpad Boards and Fingerprint Board
Remove the Touchpad bracket, Touchpad boards (the button board and switch board) and
Fingerprint board according to the following procedures and Figures 4.22, 4.23.
1. Remove four M2.5x4 screws from the Touchpad bracket. Disconnect the Touchpad
button cable and pull out the remaining cables from the upper assembly board.
M2.5x4*4
Figure 4.22 Removing the screws from the touchpad bracket
2. Remove the Touchpad bracket.
3. Remove one 2.5x4 screw from the Touchpad button board and the Touchpad switch
board.
4. Remove first the Touchpad button board and the Touchpad Switch board from the logic
upper assembly.
Satellite A500D Maintenance Manual 4-31