Filter
Top Products
Error! Style not defined. Error! Style not defined. 4 Replacement Procedures
4.14 LED board
Removing the LED Board
To remove the LED board from the logic lower assembly:
1. Remove one M2.5x4 screw and remove one cable from the motherboard as described in
Figure 4.24 below.
M2.5x4*1
Figure 4.24 Removing the LED Board
Installing the LED Board
Install the LED board according to the following procedure:
1. Seat the LED board on the logic lower assembly. Secure it with one M2.5x4 screw and
attach the cable to the motherboard.
Satellite A500D Maintenance Manual 4-33