Filter
Top Products
4 Replacement Procedures Error! Style not defined. Error! Style not defined.
5. Lift the keyboard up and detach the cable on the back of the keyboard from the
motherboard.
Figure 4.15 Removing the keyboard
Installing the Keyboard Cover and Keyboard
Install the keyboard cover and keyboard according to the following procedures.
1. Attach the cable on the back of the keyboard to the motherboard and place the keyboard
in the correct position.
2. Secure the keyboard with four M2x3 screws.
3. Place the keyboard cover in the correct position, then press the cover down from the
middle to the left side, making sure the hooks on the back of the cover are inserted
correctly.
4. Press down the cover on the right side to make sure the hooks on the back of the cover
are securely in the laptop.
5. Press down the cover in the position around the key F9 and slide to the left to make sure
the last hook on the back of the cover is secured firmly in the laptop.
6. Close the laptop and turn over. Insert two M2x4 screws in the battery lodging as shown
in Figure 4.12.
Satellite A500D Maintenance Manual 4-24