Filter
Top Products
HOW TO USE THE FAX FUNCTION
4-15
Transmission Reservation
When your fax is busy receiving a document or transmitting a document from memory,
you can “reserve” a transmission by setting the document on the original table, reading
it into memory, and entering the fax number. Once the current operation is completed,
your fax will automatically dial the number and transmit the document saving you
from having to wait.
When using the ADF :
1
Confirm that there are no
documents on the original table
and that copying is not in progres,
then gently close the original
cover.
2
Adjust the document guides to the
width of your document.
3
Place the document face up and
push it gently into the ADF. The
top edge of the document shoudl
enter the fax first.
• Adjust the resolution and/or
contrast settings if desired. Note
however that you cannot use the
HALF TONE resolution setting
with B4 size documents.
4
Enter the number of the receiving
machine using one of the
following methods:
• Press a Rapid key.
• Press the SPEED/SEARCH key
and enter a Speed Dial number.
• Enter a full number with the
number keys.
5
Press the FAX START key if you
entered a Speed Dial number or a
full number.
• The number will be dialed once the
current operation is completed, and
transmission will begin once the
connection is made.
(example)
SPEED/
SEARCH
Original face up
Special Functions