Filter
Top Products
HOW TO USE THE FAX FUNCTION
4-22
The timer function allows you to set a transmission or polling operation to be performed
automatically at a time you specify. Up to three transmission operations or polling
operations can be set at any one time, and the times they will be performed can be
specified up to a week in advance.
You can use this function, for example, to take advantage of lower nighttime telephone
rates without having to be there when the operation is performed.
• For a timer transmission, scan the document into memory when you set the
transmission. Scanning the document into memory is convenient because you do
not have to worry about document mix-ups or forgetting to load the document.
• If the memory becomes full while the document is being scanned, “MEMORY FULL”
will appear in the display.
• Press the FAX START key to transmit the pages that have been stored up to
that point in memory.
• Press the STOP key to cancel the entire transmission.
• Code numbers are used to specify each day of the week. Refer to the table below
when making time settings which include a specified day.
Timer Operations
Day
Code
Sunday
0
Monday
1
Tuesday
2
Wednesday
3
Thursday
4
Friday
5
Saturday
6
Special Functions