Filter
Top Products
HOW TO USE THE FAX FUNCTION
4-23
Special Functions
To set a timer operation:
Step Press these keys Comments
1 “TIMER MODE” will appear in
the display.
2 Select SET. “TIMER COMM.
#=1”, “TIMER COMM. #=2” or
“TIMER COMM. #=3” will
appear in the display.
3 Select “SEND MODE” or
“POLLING MODE”.
4 Enter the time of the operation
(2 digits for the hour and 2
digits for the minute).
5 Enter the code for the day of
the operation. If the operation
will be performed within 24
hours, just press the ENTER
key.
6 “ENTER NUMBER” will appear
in the display.
7 Enter the fax number of the
other machine using one of the
following methods:
• Press a Rapid key.
• Enter a Speed Dial number
with the number keys.
For a polling operation, go to
Step 11.
8 “SET RESOLUTION &
CONTRAST THEN ENTER”
will appear in the display.
9 If this is a transmission
operation, adjust the
resolution and/or contrast if
desired. (Otherwise, skip this
step.)
10 “LOAD DOCUMENT(S)” will
appear in the display. If the
document is already loaded,
no message will appear in the
display.
11 Press the STOP key a number
of times until you exit.
(example)
ENTER
DEF
ABC
ENTER
ABC
or
(example)
ENTER
ENTER
JKL
(example)
RESOLUTION
CONTRAST
(optional)
FUNCTION
or
ENTER
STOP
. . .
STOP