Filter
Top Products
3. MEDIA AND RIBBON
3- 4
3.4 Label with black marks
“Label with black marks” refers to a label stock with black marks printed at the back of the
backing paper for the position detection purpose, as illustrated below. When a label stock with
black marks is loaded, the Reflective Media Sensor is used.
Label pitch
10 to 1,000 mm
Page start line
12 mm or over
Reflective Media Senso
r
(Located under the media)
Media feed direction
2 to 13 mm
Black mark on the
reverse side
15 to 120 mm