Filter
Top Products
4. LOADING THE RIBBON
4- 2
3. Hold down the Release button and move
the Ribbon Stopper along the Ribbon Shaft
(Supply side) to the width of the ribbon in
use with reference to the Scale on the
ribbon shaft.
4.
Fit a new ribbon onto the Ribbon Shaft
(Supply side). Load the ribbon so that it
unrolls from the back side.
[Supplemental Remarks]
The ribbon can be placed on the Ribbon
Shaft (Supply side) more easily by gently
holding and squeezing the centre of the
metal plate of the Ribbon Shaft (Supply
side).
Gently squeeze metal plate.
Metal
plate
Release button
Ribbon Stopper
Scale
Ribbon Shaft (Supply side)