Filter
Top Products
74
3.SETTING OF BASIC COPY MODES
3
3. REDUCTION AND ENLARGEMENT COPYING
When placing originals on the original glass, you can copy them at the reducing and enlarging rate of 25 to
400%. For the reversing automatic document feeder (optional), you can make copy at the reducing and
enlarging rate of 25 to 200%.
There are 3 ways of making copies in the Reduction and Enlargement mode:
- Using Automatic Magnification Selection (AMS)
- Specifying both original size and copy size separately
- Using the reduction/enlargement zoom buttons or the one-touch zoom buttons
* Automatic Magnification Selection cannot be used for highly transparent originals such as OHP films and
tracing paper, wholly dark originals or originals with dark borders, or irregular sized originals such as
newspapers and magazines. For these types of originals, use the other reduction/enlargement modes.
Original sizes available for Automatic Magnification Selection (automatic detection) "Acceptable Original
Types and Sizes/Maximum Number of Sheets that can be Stored" Page 47
* Set the paper size for the “OTHER” button as required ("Setting the [OTHER SIZE] button" Page 71).
When the set originals or paper are a non-standard size other than LD, LG, LT or ST, you will select the
[OTHER] button on the screen of step 3 below. Before pressing it, you need to make the [OTHER] button
recognize the same size as the originals or paper that have been set.
Automatic Magnification Selection (AMS)
1
Place paper in the drawer(s).
- "1.SETTING COPY PAPER" Page 38
2
Press the desired drawer (or ,
button), and then press the [ZOOM]
button.
- The copy paper size is selectable on the menu in step 3 as well.