Toshiba FS-1650 Cash Register User Manual


 
– 45 –
EO1-11113
Address No. Description of Programming Contents
--
Continued
--
4 Status 1 Selection
Enter the Status Codes 2 to 8 whose status must be set to ON side. More
than one code may be entered. Enter 0 When none of the statuses should
be set to ON.
Status Item Selective Status
Code OFF ON
1 -- vacant --
2 Net to S.I. 1? No Yes
3 Net to S.I. 2? No Yes
4 Food Stamp (or GST) Status? No Yes
5 Scale Entry Prohibited Compulsory
6 -- vacant --
7 Lock or Unlock Unlock (in use) Lock (not in use)
8 Set Menu No Yes
NOTES:
Net to S.I. 1,2 … Refer to the section of PRESET RATE SETTING FOR
SELECTIVE ITEMIZERS near the end of this chapter.
Setting Examples:
To set only Status 2 to ON … Enter 2 [#]
To set Statuses 2,3,5 to ON … Enter 235 [#]
To set none of statuses to ON … Enter 0 [#]
4 Status 2 Selection
Enter the Status Code(s) 2 or/and 3 whose status must be set to ON.
Enter 0 when none of the status should be set to ON.
Status Item Selective Status
Code OFF ON
1 -- vacant --
2 This PLU is used as Ordinary PLU Modifier PLU
3 Modifier PLU Entry Optional Compulsory
for this PLU
6 Tax Status
Enter one-to four-digit Status Codes for applicable Add-on Tax.
[#]
--
Continued on next page
--
0: Non-taxable
1: Tax 1 (Tax 1 taxable)
2: Tax 2 (Tax 2 taxable)
3: Tax 3 (Tax 3 taxable)
4: Tax 4 (Tax 4 taxable)
(More than one code can be
entered for combining Tax1 to
Tax4 taxable status. For
example, enter 12 to select
Tax1 and Tax2 taxable status.)