Toshiba FS-1650 Cash Register User Manual


 
- 30 -
EO1-11113
NOTES: 1. The “R OFF” lamp status at the starting of a transaction entry decides whether a receipt
will be issued for the transaction or not. Switching the Receipt ON/OFF status during
a transaction will not be effective.
2. If a transaction entered with the “R OFF” lamp illuminated and finalized but a receipt
is required, the [RECEIPT ISSUE] (Post-issue Receipt) key can be operated to issue
a receipt.
3. Simply depress the [LOG/RECEIPT] key without a numeric entry. If the key is
depressed with a prior numeric entry in REG mode, it may turn out to be a Sign ON or
Sign OFF operation (in case of Cashier Code Entry Method).
STORE MESSAGE DISPLAY
This operation designates one of the four messages programmed to display in REG or MGR mode when
no entries are under way on the register.
(must be operated outside a sale)
| Display Message Code | [NS]
NOTE: This operation is effective when program options “Display Message method 16 CHARACTERS
HELD” and “Display Message DISPLAY in REG and MGR mode (as well as in LOCK mode)” are
both selected. Display selection in LOCK mode also depends on the line designated in this
operation.
Extinguished
Illuminated
Receipt OFF
Status
Mode Lock may be
in any position
RECEIPT-ISSUE/NON-ISSUE SELECTION
Receipts are issued or not issued according to the “R OFF” lamp illuminated/extinguished status on the
Operator Display panel.
“R OFF” (Receipt OFF) lamp Status Change Operations ([LOG/RECEIPT] = [RECEIPT])
Receipt ON
Status
..........
..........
[LOG/RECEIPT]
[LOG/RECEIPT]
OPERATION
1 to 4
(corresponding to Line
No. 1 to 4 in
programming)