Filter
Top Products
3 Tests and Diagnostics 3.31 SETUP
3-86 [CONFIDENTIAL] QOSMIO G50 Maintenance Manual (960-683)
(b) HDD Priority
Use this option to set the booting priority from HDD or USB.
Built in HDD1→Built in HDD2→USB (Default)
: detecting boot-command from Built in HDD1
Built in HDD2→Built in HDD1→USB
: detecting boot-command from Built in HDD2
Built in HDD1→USB→ Built in HDD2
: detecting boot-command from Built in HDD1
Built in HDD2→USB →Built in HDD1
: detecting boot-command from Built in HDD2
USB →Built in HDD1→ Built in →HDD2
: detecting boot-command from USB
USB →Built in HDD2→ Built in HDD1
: detecting boot-command from USB 2
NOTE: When 2nd HDD is not installed, this option does not appear in the menu.
If the boot command can not be detected from the prior HDD, booting
target changes to other devices. (Not detected from the other one)
6. Others
Whether or not you need to configure the computer with these options depends
primarily on the kind of software or peripherals you use.
(a) Core-Multi Processing
The Core Multi-Processing sets the CPU operating mode.
The configuration for the Core Multi - Processing is carried out in the BIOS
setup program.
Enabled is Dual Core mode.
Disabled is Single Core mode.
Enabled Enables Core Multi-Processing functions. (Default)
Disabled Disables Core Multi - Processing functions.
(b) Dynamic CPU Frequency mode