Filter
Top Products
3 Tests and Diagnostics 3.31 SETUP
3-88 [CONFIDENTIAL] QOSMIO G50 Maintenance Manual (960-683)
or BackSpace. Press ↓ to move the cursor to the right and ↑ to move the
cursor to the left when you set the date and time.
For the Alarm Time, set the time to turn on the power automatically. The
“second” cannot be set. When it is set to “Disabled”, the time to turn on
automatically is not set.
The Wake-up on LAN is a function to turn on the power automatically by the
call from the administrator. It can be set to “Enabled” only when “Built-in
LAN” is set to “Enabled”. To activate this function, use the AC adapter.
On Battery
The following settings can be changed when the Wake-up on LAN is Enabled.
Enabled Wake-up on LAN function whenoperating from the battery.
Disabled Wake-up on LAN function whenoperating from the battery
(Default).
NOTE:
1. Do not remove the AC adaptor and battery pack at the same time when you use this
feature. If you do so, data saved by the resume function will be lost. You must also
reset this option.
2. If you have set a password and the computer boots by the Auto Power On function and
Standby is on, the computer will start with the instant security function enabled. The
password = message is not displayed; however, you must enter the password to use the
computer.
3. This option is enabled only once, the setting is reset, after booting up.
(f) Critical Battery Wake-up
Configures what action is taken when the remaining battery power is close to
running out while the system is in Sleep Mode.
This setting is only available when the Critical battery action in Windows is
set to Hibernate (Default).
To access it, Start -> Control Panel -> System and Maintenance ->
Power Options -> Edit Plan Settings -> Change advanced power settings ->
Battery.
The operation of this function is dependent upon battery status.
Enabled When the remaining battery power is about to run out while
the system is in Sleep Mode, the system is automatically
woken up and then switched to Hibernation Mode
(Default).
Disabled No action is taken even if the remaining battery power is
about to run out while the system is in Sleep Mode.