Filter
Top Products
4
© 2009 - 2011 TOSHIBA TEC CORPORATION All rights reserved KD-1025
DISASSEMBLY AND REPLACEMENT
4 - 13
[C] PFP motor
[D] PFP motor assembly
(7) Remove 2 screws and take off the tray-up
motor from the bracket.
Fig. 4-33
(1) Take off the rear cover.
P.4-2 "[D] Rear cover"
(2) Disconnect 1 connector.
(3) Remove 4 screws and take off the PFP
motor.
Fig. 4-34
(1) Take off the rear cover.
P.4-2 "[D] Rear cover"
(2) Loosen 1 screw fixing the tensioner bracket.
Fig. 4-35
Tray-up motor
PFP motor
Connector