Filter
Top Products
KD-1025 © 2009 - 2011 TOSHIBA TEC CORPORATION All rights reserved
DISASSEMBLY AND REPLACEMENT
4 - 16
[C] Feed roller
[D] Pickup roller
(4) Remove the cover, the arbor, and the clutch
spring from the shaft, and then take off the
separation roller.
Fig. 4-42
(1) Take off the drawer feeding unit.
P.4-15 "[A] Drawer feeding unit"
(2) Take off the separation roller holder.
P.4-15 "[B] Separation roller"
(3) Remove the clip and take off the feed roller.
Fig. 4-43
(1) Take off the drawer feeding unit.
P.4-15 "[A] Drawer feeding unit"
(2) Raise the pickup arm and release the pickup
roller assembly.
(3) Remove the belt and take off the pickup
roller assembly.
Fig. 4-44
Arbor
Separation roller
Clutch spring
Cover
Shaft
Arbor
Feed roller
Clip
Pickup roller
assembly
Belt