Filter
Top Products
KD-1025 © 2009 - 2011 TOSHIBA TEC CORPORATION All rights reserved
DISASSEMBLY AND REPLACEMENT
4 - 20
[E] Upper/lower drawer detection switches (S8/S9)
(3) Release the latches and take off the switch.
(4) Disconnect the connector.
Fig. 4-54
(1) Take out the drawer.
P.4-1 "[A] Drawers"
(2) Take off the rear cover.
P.4-2 "[D] Rear cover"
(3) Take off the PFP motor assembly.
P.4-13 "[D] PFP motor assembly"
(4) Disconnect the connectors connected to the
drawer detection switch.
(5) Release the latches and remove the switch
from the front side.
Fig. 4-55
Latches
Side cover open/close switch
Drawer detection switch