Filter
Top Products
4
© 2009 - 2011 TOSHIBA TEC CORPORATION All rights reserved KD-1025
DISASSEMBLY AND REPLACEMENT
4 - 15
4.5 Feed/Separation/Pickup Roller
[A] Drawer feeding unit
[B] Separation roller
(1) Pull out the drawer for which the drawer
feeding unit will be taken off and the drawer
immediately above.
P.4-1 "[A] Drawers"
(2) Remove 1 screw and pull the drawer feeding
unit toward the inside of the copier.
Fig. 4-39
(1) Take off the drawer feeding unit.
P.4-15 "[A] Drawer feeding unit"
(2) Remove 1 screw and take off the separation
roller holder.
Fig. 4-40
(3) Remove the lever from the holder and take
off the separation roller with the shaft.
Fig. 4-41
Lower drawer feeding unit
Upper drawer feeding unit
Lever
Holder
Separation roller