Filter
Top Products
1
© 2009 - 2011 TOSHIBA TEC CORPORATION All rights reserved KD-1025
SPECIFICATIONS
1 - 1
1. SPECIFICATIONS
Note:
This manual explains on the premise that 2 drawers are available (that is, the optional drawer
module is installed).
Item KD-1025
Appearance
Feeding method Automatic feeding: 1 drawer installed from the front
Paper Size: A3, B4, A4, A4-R, B5, B5-R, A5-R, LD, LG, LT, LT-R, 8K, 16K, 16K-R, FOLIO,
COMPUTER, 13"LG, 8.5"x8.5"
Thickness: 64 g/m
2
to 105 g/m
2
(17 lb. Bond to 94.5 lb. Cover)
Capacity of drawer
Stack height: 60.5 mm (Approx. 550 sheets: 80 g/m
2
(22 lb. Bond))
Dimensions 575 (W) × 583 (D) × 292 (H) mm
22.64 (W) × 22.95 (D) × 11.50 (H) inch
(Height - Floor to top of the front cover)
660 (W) × 701 (D) × 292 (H) mm
25.98 (W) × 27.60 (D) × 11.50 (H) inch
(Including the stabilizer cover)
Weight Approx. 21 kg (46.3 lb.)
Power supply 5 V, 24 V (supplied from the equipment)
Accessory Unpacking Instructions (1)
Connecting plates (4)
Screws for connecting plates (6)
Fixing screw for ground wire (1)
Paper size indicator sheets (2)
Stabilizer brackets (4)
Feeding side stabilizer foot (1)
Screw for feeding side stabilizer foot (1)
Rear side stabilizer covers (2)
Front side stabilizer cover (1)
Screws for stabilizer (4)
Option Drawer module: MY-1033
(With this option, 2 drawers become available for feeding).