Filter
Top Products
KD-1025 © 2009 - 2011 TOSHIBA TEC CORPORATION All rights reserved
DISASSEMBLY AND REPLACEMENT
4 - 18
4.6 Switches and Sensors
[A] Tray-up sensor (S4/S5)/paper empty sensor (S6/S7)
[B] Paper stock sensor (S10/S11)
(1) Take off the drawer feeding unit.
P.4-15 "[A] Drawer feeding unit"
(2) Remove 1 screw and take off the front side
cover.
Fig. 4-48
(3) Disconnect the connector and release the
latch to take off the tray-up sensor.
(4) Disconnect the connector and release the
latch to take off the empty sensor.
Fig. 4-49
(1) Take off the drawer feeding unit.
P.4-15 "[A] Drawer feeding unit"
(2) Pull up the paper stock sensor lever.
(3) Disconnect the connector and release the
latch to take off the paper stock sensor.
Fig. 4-50
Front side cover
Tray-up sensorEmpty sensor
Paper stock sensor
Paper stock
sensor lever