Filter
Top Products
4
© 2009 - 2011 TOSHIBA TEC CORPORATION All rights reserved KD-1025
DISASSEMBLY AND REPLACEMENT
4 - 19
[C] Upper/lower drawer feed sensor (S2/S3)
[D] Side cover open/close switch (S1)
(1) Take off the side cover.
P.4-3 "[G] Side cover"
(2) Remove 6 screws and take off the guide.
Fig. 4-51
(3) Disconnect 1 connector.
(4) Release the latches and take off the sensor.
Fig. 4-52
(1) Take off the side cover.
P.4-3 "[G] Side cover"
(2) Remove 6 screws and take off the guide.
Fig. 4-53
Guide
Latches
Upper drawer feed sensor
Lower drawer feed sensor
Guide