Filter
Top Products
6. PROGRAMMING OPERATIONS
EO1-11152
6.14 PLU Preset-Code Key Setting (Submode 27)
6-33
PK-2 KEYBOARD
1 11 21 31 41 51 61 71 81 91 101 111 121
2 12 22 32 42 52 62 72 82 92 102 112 122
3 13 23 33 43 53 63 73 83 93 103 113 123
4 14 24 34 44 54 64 74 84 94 104 114 124
5 15 25 35 45 55 65 75 85 95 105 115 125
6 16 26 36 46 56 66 76 86 96 106 116 126
7 17 27 37 47 57 67 77 87 97 107 117 127
8 18 28 38 48 58 68 78 88 98 108 118 128
9 19 29 39 49 59 69 79 89 99 109 119 129
10 20 30 40 50 60 70 80 90 100 110 120 130
REMARKS: 1. The Nos 1 through 130 marked on the PK-2 Keyboard are the KEY Nos to be printed on the
left side of the program receipt issued in the operation on the preceding page. If each KEY is
not set with a PLU Code, the auto-preset PLU Code identical to the initial KEY No. in the
above figure will be active as its preset PLU Code
ex.) KEY No.1 ................... PLU Code 1
KEY No.130............... PLU Code 130
2. When a PLU code is assigned to a PLU Preset-code Key on the ECR Keyboard in the
operation on the preceding page, the Hardware Key Code which indicates the absolute
location of the key will be printed to the left of the assigned PLU Code. The Hardware Key
Codes of the ECR keyboards of Ordinary Type and Flat Type are shown on the next page.