Filter
Top Products
6. PROGRAMMING OPERATIONS
EO1-11152
6.21 Preset Rate Setting for Selective Itemizers (SI1 and SI2)
6-43
The applications of this function may vary from store to store. Some stores may use it for counting the service
stamps to be issued to the customers according to the sale amount of service-stampable items. In this case, the
option “SI Total Non-affects Sale Total” should be selected, and a preset % rate, 1% for example, may be set to
issue one service stamp for every $1.00. Thus the number of stamps to be issued to the customer is displayed
(and printed if so programmed) as a result of calculation with the preset % rate, but the resulted value (the
number of stamps in this case) will not affect the sale total.
Example 1) With option “SI Total Non-affects Sale Total”:
Key Operation in REG Mode
Receipt/Journal Print
100
[DEPT 1]
(SI-net)
150
[DEPT 2]
(non-SI)
200
[DEPT 3]
(SI-net)
[SI/TL]
(1% is preset)
[AT/TL]
Dept.1 and Dept. 3 are programmed with SI-net-status. On depressing
[SI/TL]
, “0.03” (which is 1 % of total
amount of Dept. 1 “$1.00” + Dept. 3 “$2.00”) is displayed and printed, and 3 stamps are to be issued to the
customer in this case.
The sale total “$4.50” is not affected by the SI calculation.
Other stores may use it for calculating the discount amount for certain sales items during a special discount sales
period by presetting the discount % rate on the SI and programming SI-net status to certain Departments and
PLUs which are subject to the special discount.
Example 2) With option “SI Special Discount”:
Key Operation in REG Mode
Receipt/Journal Print
100
[DEPT 1]
(SI-net)
150
[DEPT 2]
(non-SI)
200
[DEPT 3]
(SI-net)
[SI/TL]
(10% is preset)
[AT/TL]
On depressing
[SI/TL]
, “-0.30” (which is 10% discount from the total amount of Dept.1 + Dept. 3 items) is
displayed and printed, and that amount is subtracted from the sale total. ($4.50 - $0.30 = $4.20)
“S” : SI-net Symbol
Number of stamps to be issued
Discount Amount
resulted by SI %