Filter
Top Products
6. PROGRAMMING OPERATIONS
EO1-11152
6.23 TAX Table Setting
6-46
TYPE 2: TAX 1 COMBINATION OF NON-CYCLIC BREAKS AND % RATE
First set all the breaks up to the “A” Break entry and the
[ST]
key depression as shown in TYPE 1.
| TAX RATE applied when exceeding the “A” Break amount
|
(0.0001% to 99.9999%; use the
[.]
key if a decimal portion is contained. Examples: To set 5%, enter 5. To
set 5.26%, enter 5.26. The fraction of the amount resulting from this % rate calculation will be rounded off.)
[AT/TL]
(to complete this tax programming)
TYPE 3: TAX 1 % RATE ONLY
0
[TX1/M] [ST]
| TAX RATE
|
[AT/TL]
NOTES: 1. For Tax 2, Tax 3, Tax 4 table programming, follow the same procedure in TYPE 1, 2, or 3 on the
preceding page, using [TX2/M] or [TX3/M] or [TX4/M] instead of [TX1/M].
2. If multiple tax tables are programmed, the Tax 1 table must be set first, then Tax 2, Tax 3, and
Tax 4. The Tax 1 table setting will automatically reset all of the old Tax 1, 2, 3. and 4 tables if
they have been programmed.
3. No second depression of the [ST] key is allowed within one tax table programming.
4. A maximum of 99 breaks can be entered for Tax 1 to Tax 4 tables altogether.
5. For inclusive tax (Tax 3 or Tax 4), tax table programming using a rate only is available. Tax table
programming using a tax break is unavailable.
Example 1) TAX 1 FULL BREAKS
Tax Table
Key Operation
Mode Lock:
SET
Amount Range
Tax Levied
$0.00 to $0.10 0¢ 10
[TX1/M]
$0.11 to $0.22 1¢ 22
[TX1/M]
$0.23 to $0.39 2¢ 39
[TX1/M]
$0.40 to $0.56 3¢ 56
[TX1/M]
$0.57 to $0.73 4¢ 73
[TX1/M]
$0.74 to $0.90 5¢ 90
[TX1/M]
$0.91 to $1.08 6¢ 108
[TX1/M]
---- “A” Break
[ST]
$1.09 to $1.24 7¢ 124
[TX1/M]
$1.25 to $1.41 8¢ 141
[TX1/M]
$1.42 to $1.58 9¢ 158
[TX1/M]
$1.59 to $1.74 10¢ 174
[TX1/M]
$1.75 to $1.92 11¢ 192
[TX1/M]
$1.93 to $2.08 12¢ 208
[TX1/M]
---- “B” Break
[AT/TL]
(The description for the TAX RATE in TYPE 2 is also applied to this case.)
∗
∗∗