Filter
Top Products
5. PROGRAMMING OPERATIONS
EO1-11152
5.2 Programming Operations Added for In-line Terminals
5- 3
5.2.2 In-line ID and LAN Network Setting (Submode 77)
This submode is available for in-line terminals (including the master and backup master terminals). It must be
operated separately on each terminal since the In-line ID should vary from terminal to terminal. The data sent in
this submode is used as the in-line address of the terminal for in-line service operations.
Any time outside a sale for Master or Satellite
Mode Lock:
SET
and IN-LINE Lamp illuminated
77
[@/FOR]
1
[ST]
| In-line ID
|
[#]
Assign No. of 01 to 16
01: Master Terminal
02: Backup Master
03 to 16: Satellite Terminals
2
[ST]
| Network Status
|
[#]
3
[ST]
| IP Address
|
[#]
12 digits
(
NOTE 2
on the next page)
4
[ST]
| IP Address of Master Terminal
|
[#]
12 digits
(
NOTE 2
on the next page)
5
[ST]
| Subnet Mask
|
[#]
12 digits
(
NOTE 2
on the next page)
6
[ST]
| Default Gateway
|
[#]
12 digits
(
NOTE 2
on the next page)
[AT/TL]
OPERATION
CONDITION
Enter a maximum of eight-digit number
composed of Bit Nos whose status must be
selected to the “SET” status in the Network
Status Table. (
NOTE 1
on the next page)