Filter
Top Products
10. REGISTERING PROCEDURE AND PRINT FORMAT
EO1-11152
10.1 Receipt-Issue/Non-Issue Selection
10- 2
10.1 Receipt-Issue/Non-Issue Selection
Receipts are issued or not issued according to the “R OFF” lamp illuminated/extinguished status on the Operator
Display panel.
“R OFF”
(Receipt OFF)
Lamp Status Change Operations
(
[LOG/RECEIPT]
=
[RECEIPT]
).
Mode Lock may be in any position
[LOG/RECEIPT]
Extinguished
[LOG/RECEIPT]
Illuminated
Receipt ON Status Receipt OFF Status
NOTES: 1. The “R OFF” lamp status at the starting of a transaction entry decides whether a receipt will be
issued for the transaction or not. Switching the Receipt ON/OFF status during a transaction will
not be effective.
2. If a transaction entered with the “R OFF” lamp illuminated and finalized but a receipt is required,
the [RECEIPT ISSUE] (Post-issue Receipt) key can be operated to issue a receipt.
3. Simply depress the [LOG/RECEIPT] key without a numeric entry. If the key is depressed with a
prior numeric entry in REG mode, it may turn out to be a Sign ON or Sign OFF operation (in case
of Cashier Code Entry Method).
4. Receipt-issue or non-issue cannot be selected after a non-add number print, sales person entry,
comment print, or credit card No. check.
10.2 Store Message Display
This operation designates one of the four messages programmed to display in REG or MGR mode when no
entries are under way on the ECR.
(Must be operated outside a sale)
|Display Message Code
|
[NS]
1 to 4
(corresponding to Line
No.1 to 4 in programming)
NOTE: This operation is effective when program options “Display Message Method 16 CHARACTERS HELD”
and “Display Message DISPLAY in REG and MGR mode (as well as in LOCK mode)” are both
selected. Display selection in LOCK mode also depends on the line designated in this operation.
OPERATION