Filter
Top Products
10. REGISTERING PROCEDURE AND PRINT FORMAT
EO1-11152
10.48 Sale Finalization by EFT (Electronic Fund Transfer)
10-33
(7) Cash-only Debit (Debit Authorization)
Cashing operation with a Debit card is performed here.
Key Operation FIU Upper Row Display
Amount to be cashed
[DEBIT]
SWIPE CARD
(
[C]
)
Card Slide
PROCESSING
(in case of no response from EFT) NO RESPONS
Response from the EFT terminal ENTER PIN#
Input the Pin No. from the Pin Pad
Then depress the
[ENTER]
key
PROCESSING
(in case of no response from EFT) NO RESPONS
or
(in case of decline) DECLINE
Response from the EFT terminal APPROVED
ECR prints a Customer Receipt
ECR prints a Store Receipt
NOTES: 1. Before performing this operation, the [DEBIT] key should be programmed with the status “no-
purchase cashing is allowed”. Also each EFT Media Key should be programmed with the statuses
both “with EFT process” and “off line authorization is available”. Failure to do this may cause an
error.
2. For the EFT function, do not perform any registration in Receipt OFF mode.
3. Receipt post-Issue operation after the Cash-only Debit is unavailable.
4. Key operation on the ECR is unavailable during the inquiry to the host.
5. The Endorsement Print can be performed.
6. Training Cashiers are unacceptable to the EFT terminal.
7. Issuance of the Store Receipt is selectable.
8. When manual issuance of store receipt has been programmed, the store receipt must be issued to
perform next transaction or read/reset jobs.
(Max. 7 digits)
Pressing the [C] key at this
point will restore the ECR to
the condition being ready for
the [DEBIT] key entry
ECR wait condition
OPERATION