Filter
Top Products
B-2 Satellite P200/Satellite Pro P200
Display Modes
Displaying movies on a TV or CRT
This section describes how to set up your system to display movies
simultaneously on your computer's LCD and on an external TV or CRT
monitor.
To connect a television, follow the steps below.
1. Turn the computer off.
2. Use a video cable (not supplied) to connect the television to the video
out port.
3. Turn the television on.
4. Turn the computer on.
You can use the hotkeys Fn + F5 or use the TV-Out button to change the
display device. Refer to Chapter 6, The Keyboard.
If a television is connected to the computer, set the TV type in Display
Properties. Follow the steps below, based on the configuration of your
computer:
2048 x 1536 16 bit 60
32 bit 60
CRT Display
Resolution
Color Depth
(bit)
Refresh Rate
(Hz)
Some of display mode might not be supported depending on the external
monitor which you use.