Filter
Top Products
Problem Procedure
Computer shuts
down and DC IN
indicator blinks
orange
Leave the computer off until the DC IN indicator
stops blinking.
It is recommended to leave the computer off until the interior reaches room
temperature even though the DC IN indicator stops blinking.
If the computer has reached room temperature and
it still does not start, or if it starts but shuts down
quickly, contact your reseller, dealer or service
provider.
Computer shuts
down and its DC IN
indicator is flashing
green
This indicates a problem with the heat dispersal
system - you should contact your reseller, dealer or
service provider.
AC power
If you have trouble turning on the computer with the AC adaptor connected
you should check the status of the DC IN indicator. Please refer to chapter
6, Power and Power-Up Modes for further information.
Problem Procedure
AC adaptor doesn’t
power the computer
(DC IN indicator
does not glow green)
Check the connections to make sure that the
power cord/adaptor is firmly connected to the
computer and a working power outlet.
Check the condition of the cord and terminals. If
the cord is frayed or damaged it should be
replaced, while if the terminals are soiled, they
should be cleaned with a clean cotton cloth.
If the AC adaptor still does not power the
computer, you should contact your reseller, dealer
or service provider.
Battery
If you suspect a problem with the battery, you should check the status of
the DC IN indicator as well as the Battery indicator. Please refer to chapter
6, Power and Power-Up Modes for more information on these indicators,
together with general battery operation.
PORTÉGÉ R700 / Satellite R630
User's Manual 8-5