Filter
Top Products
When a TOSHIBA Hi-Speed Port Replicator is connected to the
computer, you can not use the following computer’s ports: LAN jack,
DC IN 19V jack and External monitor port.
When connecting an AC Adaptor to the TOSHIBA Hi-Speed Port
Replicator, use only the AC Adaptor included with TOSHIBA Hi-Speed
Port Replicator. Do not use the computer’s AC Adaptor.
The following ports are available on the TOSHIBA Hi-Speed Port
Replicator.
RJ45 LAN jack
External monitor port
DC IN 19V jack
Security lock slot
Universal Serial Bus 2.0 port (four)
Universal Serial Bus 3.0 port (two)
Serial port
HDMI out port (some models are equipped with a HDMI out port)
Microphone jack
Line out (Headphones, Speakers)
When the replicator is docked, booting from USB 3.0 ports may be not
available. To check whether your computer supports booting from
USB 3.0, please contact TOSHIBA support for assistance.
Refer to the TOSHIBA Hi-Speed Port Replicator User's Manual for
more details on connection methods.
Security lock
A security locks enable you to anchor your computer a desk or other heavy
object in order to help prevent unauthorized removal or theft. The computer
has a security lock slot on its right side into which you can attach one end
of the security cable, while the other end attaches to a desk or similar
object. The methods used for attaching security cables differ from product
to product. Please refer to the instructions for the product you are using for
more information.
Connecting the security lock
In order to connect a security cable to the computer, follow the steps as
detailed below:
1. Turn the computer so its right side faces you.
2. Align the security cable with the lock slot and secure it in place.
PORTÉGÉ R700 / Satellite R630
3-34 User's Manual